YA00001490 Original Excavator Air Condition Filter for Hitachi ZX200-5G

The original air conditioning filter (part number YA00001490) is a genuine cabin air purification component of the Hitachi ZX200-5G excavator. It is also widely used in 5G series models such as Hitachi ZX210-5G, ZX240-5G, ZX330-5G, ZX470-5G, and is compatible with early models such as EAX-5G and 200-3G. The universal number of this filter includes CA-27060, 5000957, PA30174, etc., which are its cross identification in Hitachi's original and third-party accessory systems. When placing an order, it is necessary to provide the complete model and serial number of the excavator for verification to ensure that it matches the size and installation structure of the air conditioning system duct completely.

This product belongs to the cabin air conditioning filter element (also known as "air conditioning grid") specifically designed for construction machinery. It uses multi-layer folded paper filter materials with a filtration accuracy of 1 µ m, which can effectively intercept PM2.5, pollen, dust, mold spores, and odor particles. Its design complies with the GB/T 32085.1 standard, with a working temperature range of -40 ° C to+80 ° C, a working pressure of 0.02-1.6MPa, a rated air volume of 3m ³/min, and low wind resistance, high dust holding capacity, and moisture and mold resistance characteristics. The frame of the original filter element is sealed with polyurethane sealant to ensure a tight fit with the filter box and prevent unfiltered air leakage.

It is recommended to check the filter element every 500 hours of work or every quarter, and in dusty and highly polluted conditions, it should be shortened to 250-300 hours. When replacing, first turn off the air conditioning system, remove the interior trim panel or glove box, take out the old filter element, and thoroughly clean the dust inside the filter element box. When installing the new filter element (YA00001490), pay attention to the airflow direction arrow (usually pointing towards the cab), and ensure that the sealing edge is fully pressed into the groove. Regularly clean the evaporator and air duct of the air conditioner to avoid moisture and mold on the filter element. Regular replacement can significantly improve the cabin air quality, protect the health of passengers, and extend the service life of air conditioning fans and evaporators.